Operation And Use - Niko 05-090-10 Mode D'emploi

2.4. Roll-down shutters window
In the Roll-down shutters window, you can control separate roll-down shutters and curtains. When using
mode M1 of the roll-down shutter module, you can open and close every roll-down shutter.
In the Roll-down shutters window, channels 21 up to and including 26 are used. Program opening the shutter
on button A, closing the shutter on button B. You can stop a moving shutter by pressing button A or B. For
programming, use function M1 of the roll-down shutter module.
28A
27A
27B
28B
2.6. Light atmospheres window
In the Light atmospheres window, you can carry out 8 atmosphere functions per room.
In the Light atmospheres via Nikobus window, channels 30 up to and including 37 are used.
For programming a light atmosphere, use function M3 of the dim controller.

3. OPERATION AND USE

Start the Pronto by touching the touch screen with your finger. Then press the Home (1) button to prompt the opening window. In this window, you can
either select controlling Nikobus functions or directly controlling the Allegretto audio system. Press the upper/lower part of the navigation button (2)
to go to the previous or next page. Press the left or right part of this button to browse backward or browse forward respectively. Press button 4 to go
to the Tools menu. This menu enables you to modify the Pronto default settings or to change the names of the buttons (please consult the Pronto user
manual of Philips for further details).
Press the Nikobus button (3) to directly go from any window to the 'Room selection' window, where
you can carry out Nikobus controls.
Press the Allegretto button (5) to directly go from any window to the 'Zone selection' window for
direct Allegretto controls.
Press the Audio/TV button (6) to go to the window that allows you to directly operate the TV, VCR,
DVD, SAT, CD, tuner...
3.1. Controlling the Nikobus functions
Click on the Nikobus logo. Then select the room in which you wish to use the Pronto remote control.
You can modify the names of the rooms via the Tools (4) menu (please consult the Pronto user manual
of Philips for further details). After you have selected a room, select the type of function you wish to
control. You can choose from:
- Light 1
- Light 2
- Appliances
- Roll-down shutters
- Audio
- Light atmospheres
Each control group has its own icon. Clicking on an operational group prompts the corresponding
page.
14
2.5. Allegretto via Nikobus window
27A
In the Allegretto via Nikobus window, you can control the Allegretto audio distribution system per audio
28C zone via the Nikobus Audiolink module.
In the Allegretto via Nikobus window, channels 27 and 28 are used.
27A: Go to next source
27C
27B: Switch zone ON/OFF
27D
27C: Volume up
27D: Volume down
28D
28A: Go to source 1
28B: Go to source 2
28C: Go to source 3
28D: Go to source 4
05-090-10
21
22
23
24
25
26
30
31
32
33
4 3 2 1
EN
A
B
A
B
34
35
C
D
11
10
9
8
7
5 6