Set Up Speakers - Denon AVR-391 Mode D'emploi

ENGLISH
3
Turn on power
Turn on the TV and subwoofer
1
power.
Power on
Change the TV input to the input of
2
this unit.
Press to turn on power
3 POWER ON
to the unit.
The power indicator fl ashes green and the
power turns on.
Power on
Power on
6
4

Set up speakers

1 2 3 4 5
The settings for the following 5 items should be made:
Speaker Confi g.
Bass Setting
Distance
Channel Level
Crossover Freq.
Menu operation
1 Press .
MENU
The menu is displayed on the display of this unit.
2 Press .
ENTER
Use ui to select the menu to be set or operated, and then press
3
.
ENTER
4 Use o p to select a detailed setting, and then press
• To return to the previous item, press
• Exiting the Menu, press
The menu returns to normal display.
Select speaker confi guration and size (bass
reproduction capability).
Set subwoofer and LFE signal range playback.
Set distance from listening position to speakers.
Measure beforehand the distance from the
listening position to each speaker.
Set the volume of the test tone to be the same
when it is output from each speaker.
Set the maximum frequency of the bass signal
output from each channel to the subwoofer.
Set the Crossover Frequency to suit the bass
reproduction capability of the speaker being used.
Speaker Setup
ENTER
RETURN
.
MENU
while the menu is displayed.
1 2 3 4 5
.