Parameter Entry; Open Parameter Entry; Change Parameter - FEIG Electronic MWD BP Mode D'emploi

Quick Reference Guide

1 Parameter Entry

1.1 Open Parameter Entry

a) Remote Control MWD RC
Symbol Key
i i
1.
-Button
1..4
2a. value 1..4
or
Volume +
2b.
Volume -
3b. On/Off
b) Buttons on Motion Detector MWD BP
The left button is functionally assigned to the On/Off-button
Right button is equivalent to the Volume +- button
Key
1. Right or Left
2. Right
3. Left

1.2 Change Parameter

Before changing parameter values you have to open the parameter entry as described above.
a) Remote Control MWD RC
Symbol Key
Volume +
1.
Volume -
2. On/Off
Volume +
3.
Volume -
4a. On/Off
or
4b. On/Off
5. On/Off
BP-Quick_Ref_06_05_12.doc
Radar Motion Detector MWD BP
Key-
Description
press
Channel 1: displayed address
short
Channel 2: displayed address + 1
Direct confirmation
short
of device address
short
Select address value
Indirect confirmation
short
of device address
.
Key-
Description
press
Channel 1: displayed address
short
Channel 2: displayed address + 1
short
Select address value
Confirmation
short
of device address
Key-
Description
press
Change parameter name
short
(long)
(long: quick selection)
Return to display
short
parameter value
Change parameter value
short
(long)
(long: quick selection)
short
Undo changes
long
Save new parameter value
Return to display
short
parameter name
mt 2006-05-12
Action
Actual device address is displayed
with blinking digit and decimal point
Display first parameter name
Increment or decrement value.
Changed values doesn't blink !
Display first parameter name
on remote control MWD RC.
Action
Actual device address is displayed
with blinking digit and decimal point
Increment or decrement value.
Changed values doesn't blink !
Display first parameter name
Action
Display parameter name with char-
acter and decimal point.
Actual parameter value is displayed
without decimal point.
Display changed parameter value
with blinking decimal point.
Display actual parameter value again
(without decimal point)
Decimal point expires after success-
ful saving.
Display parameter name with char-
acter and decimal point.
FEIG ELECTRONIC GmbH
3/8
Display
Example
1.
L.
2.
F
L.
Display
Example
1.
2.
L.
Display
Example
d.
P.
1
2.
0.
1
2
d.