Operating; Cleaning And Storage - HyperIce Hypervolt GO Mode D'emploi

EN
PLEASE READ PRIOR TO USE.
The Hypervolt GO is a handheld percussion massage device that helps relieve muscle
soreness and stiffness, accelerates warmup and recovery before and after physical
activity.

OPERATING

With your hand on the handle, press down on the power/speed button with your index
finger. Hold for two seconds until the LED band (bottom of handle) illuminates and
release. Your Hypervolt GO is now ready for use.
Choose your desired speed (1-3) by pressing the power/speed button once per speed.
The blue lights on the bottom of the handle will indicate speed setting. To power off,
simply hold the power/speed button down for two seconds
To change head attachments, turn the unit off then insert the desired head directly into
the shaft / opening while pushing firmly.

CLEANING AND STORAGE

Make sure the power is OFF and the battery charger is not attached. Use a damp, clean,
cloth and gently wipe your Hypervolt GO. Store in a clean, cool place when not in use.
SPECIFICATIONS
1. Interchangeable head attachments (2)
2. ON / OFF power switch
and speed setting button
3. Handle / rechargeable
lithium-ion battery
4. Battery level indicators (LED band)
5. Speed indicators (3)
AC-DC charger: 110-240V - 50/60Hz 0.7A - 18.0V
Frequency (Hz): level 1 - 2200/36, level 2 - 2750/45, level 3 - 3200/53
Weight: 1.5 lbs/0.68 kg
1
1.0A 18.0 W
2
3
4
5