Metabo SPA 1200 Instructions D'utilisation page 11

Table of Contents
1. Components and Parts
(standard delivery)
2. Please read first!
3. Safety
Specified Conditions of Use
3.1
General Safety Instructions
3.2
Symbols on the Machine
3.3
4. Assembly
4.1 Mains Connection
4.2 Electrostatic Charging
Overload Protection
4.3
5. Operation
6. Care and Maintenance
6.1 Maintenance
6.2 Cleaning
Storage
6.3
6.4 Repairs
7. Available Accessories
8. Disposal
9. Technical Specifications
2. Please read first!
These operating instructions have been
written to make it easier for you, the us-
er, to learn how to operate this machine
and to do so safely. Here is how to use
the instructions:
– Read these instructions before use.
Pay special attention to the safety
information.
– These instructions are intended for
persons having a basic technical
knowledge of the operation of ma-
chines like the one described here-
in. If you have no experience what-
soever, we strongly recommend to
seek the advise of an experienced
person.
– Keep all documents supplied with
this machine for future reference.
Retain your proof of purchase in
case of a future warranty claim.
– This machine must not be sold or
lent to someone else without being
accompanied by these operating in-
structions and all other machine
documents.
– The manufacturer is not liable for
any damage resulting from neglect
of these operating instructions.
Information in these instructions is de-
noted as under:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury by electric
shock.
A
Caution!
Risk of material damage.
3
Note:
Additional information.
– At times, numbers are used in illus-
trations (1, 2, 3, ...). These numbers
– indicate component parts;
– are consecutively numbered;
– correspond with the number(s) in
brackets (1), (2), (3) ... in the
neighbouring text.
– Numbered steps must carried out in
sequence.
– Instructions which can be carried
out in any order are indicated by a
bullet point (•).
– Listings are marked by a dash (–).
3. Safety
3.1 Specified Conditions
of Use
This machine is designed for
the extraction of wood and
plastic chips as well as wood
dust from woodworking ma-
chines.
Inflammable gases (eg paint
or varnish mist) and explosive
media must not be extracted.
CAUTION - This device is not
suitable for extracting dust that
is hazardous to health.
ENGLISH
Industrial use, use in vocation-
al training, in schools, etc ist
not permitted.
Polyethylene dust collection
bags of 0.10 mm minimum
thickness must be used.
When using dust collection
bags made of other materials,
these must have the same
strength against mechanical
damage.
Any use other than the use
specified above is not al-
lowed. Any modification of the
machine or use of spare parts
not tested and approved by
the manufacturer may cause
unforeseeable damage!
3.2 General Safety Instruc-
tions
 When using this tool ob-
serve the following safety
instructions, to exclude the
risk of personal injury or
material damage.
Please also observe the

special safety instructions
in the respective chapters.
Also follow the instructions

of the woodworking ma-
chine the dust extractor is
connected to.
 In case of a fault unplug the
machine immediately. Nev-
er start the machine without
the upper dustbag in place.
Use the machine only to

extract dust from wood-
working machines.
Ignition sources must not

be extracted.
Should the machine catch

fire, unplug immediately or
interrupt the power supply
by turning the fuse/circuit
breaker OFF. Extinguish
the fire immediately with
11