Working Area; Before Initial Use - Staba ER1 Mode D'emploi

∙ Do not leave the appliance outdoors or in a damp area.
∙ Never immerse the appliance in water.
∙ Do not operate the appliance if it is damaged (for example if it
felt down).
∙ Never use the appliance following a malfunction, e.g. if it has
been dropped or damaged in any other way.
∙ Particularly with the enamelled version, this can cause flaking
on the pan, which can then end up in the food.
∙ The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
∙ To prevent injury, repairs such as replacing a damaged power-
cord, should only be carried out by customer service.
∙ The appliance becomes very hot. Do not move the ap-
pliance until it has cooled down! The sides of the appli-
ance become hot. Do not touch during the usage.
∙ Beware of steam during cooking and when opening the lid. Al-
low the appliance to cool down before transporting it. Be awa-
re that the appliance can be extremely heavy during transport.
Drain the hot liquid when transporting the appliance! Danger
of burnes!

Working area:

Important: Never place the appliance on or next to a hot surface (e.g. stove). Always
use it on a stable, flat and temperature resisting surface. Always take care that no
inflammable objects are near to the appliance.

Before initial use:

∙ The device should be given a thorough cleaning before pouring in liquid.
∙ Give container and rack a thorough cleaning with hot water and a little washing up
liquid, rinse and dry.
∙ To clean the drain tap, boil some water in the appliance and drain it through the
tap.
∙ Attention: Do not immerse the appliance in water!
∙ Wipe inside of lid with a damp cloth and dry off.
∙ Unwind the complete powercord.
8