Tv Aspect; Smart Hub Screen Size; Bd Wise (Samsung Products Only); Resolution - Samsung HT-D5200 Mode D'emploi

TV Aspect

Depending on the type of television you have, you
may want to adjust the screen size setting.
•
16:9 Original : Select when you connect the
product to a 16:9 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 4:3 will be displayed with
black bars on the left and right.
•
16:9 Full : Select when you connect the product
to a 16:9 TV screen. All content will fi ll the full
screen. Content formatted in 4:3 will be stretched.
•
4:3 Letter Box : Select when you connect the
product to a 4:3 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 16:9 will be displayed with
black bars on the top and bottom.
•
4:3 Pan-Scan : Select when you connect the
product to a 4:3 TV screen. 16:9 content will have
the extreme left and right portions cut off.
✎
NOTE

Depending on the disc type, some aspect ratios
may not be available.

If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.

If you select the 16:9 Original, your TV may
display 4:3 Pillarbox (black bars on sides of
picture).

Smart Hub Screen Size

Set the Smart Hub Screen to the optimal size.
•
Size 1 : Smart Hub screen size will be smaller than
default. You may see some black on sides of
screen.
•
Size 2 : This is the default setting for Smart Hub.
The product displays the normal Smart Hub
screen size.
•
Size 3 : This will display a larger Smart Hub screen
size. The image may be too large for your TV
screen.
HT-D5200_ELS_0310.indd 27 HT-D5200_ELS_0310.indd 27

BD Wise (Samsung Products only)

BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via HDMI,
and BD Wise is on in both the product and TV, the
product outputs video at the video resolution and
frame rate of the BD/DVD disc.
•
Off : The output resolution stays fi xed at the
resolution you set previously in the Resolution
menu, regardless of the resolution of the disc.
See Resolution below.
•
On : The product outputs video at the original
resolution and frame rate of the BD/DVD disc.
✎
NOTE

When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.

If the product is connected to a device that
does not support BD Wise, you can not use
the BD Wise function.

For proper operation of BD Wise, set the BD
Wise menu of both the product and the TV to On.

Resolution

Lets you set the output resolution of the
Component and HDMI video signal to Auto,
1080p, 1080i, 720p, 576p/480p, or 576i/480i.
The number indicates the number of lines of
video per frame. The i and p indicate interlaced
and progressive scan, respectively. The more
lines, the higher the quality.
•
Auto : Automatically sets the output resolution
to the connected TV's maximum resolution.
•
BD Wise : Automatically sets the resolution to
the resolution of the BD/DVD disc if you have
connected the product via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On. See BD
Wise above.)
•
1080p : Outputs 1080 lines of progressive
video. (HDMI only)
•
1080i : Outputs 1080 lines of interlaced video.
•
720p : Outputs 720 lines of progressive video.
•
576p/480p : Outputs 576/480 lines of
progressive video.
•
576i/480i : Outputs 576/480 lines of interlaced
video. (VIDEO only)
27
English
2011-03-15 ¿ÀÀü 8:50:36 2011-03-15 ¿ÀÀü 8:50:36