Lindy 43174 Manuel Utilisateur page 3

Windows 7
1. Insert the provided CD into your disc drive.
2. Click Run Setup.exe to start the installation.
NOTE:
If the AutoPlay does not appear automatically, locate and double-click
on the Setup.exe file in the driver folder to launch the setup.
Enter the administrator password and then click Yes to start the instal-
lation if a User Account Control dialog box appears.
3. Click I Accept for the next step.
4. Be patient with the installation procedure.
5. When the operating system detects the adapter, the reminder mes-
sage will appear on the system tray.
Verifying the installation:
To verify the driver of the adapter, follow the step below.
1. Following the path to open the device manager:
Control Panel\ System and Security\ Systems\ Device manager
2. You will find DisplayLink Adapter device listed as below.
NOTE:
If you cannot find the driver in the list, the driver may not be properly
installed. Please delete the item, unplug the adapter and repeat the
installation step s.