Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAUTION: The blades are hot after the trim-
mer has been switched off.
5. Disconnect Pole Trimmer – Disconnect the
Pole Trimmer from the power supply:
- when not in use
- before servicing
- when changing accessories such as blades
- when clearing jammed material from blades
- when moving from one worksite to another.
Parts
1. Blade
2. Transport guard
3. The adjusting knob (angle) for the cutter head
4. Threaded sleeve 1 (used to adjust the length of the shaft)
5. Telescoping shaft
6. Shoulder belt clasps
7. Shoulder belt
8. Wrapped handgrip
9. Lock for the ON/OFF switch
10. ON/OFF switch
11. Grip
12. Mains cable with plug
13. Cable strain relief
14. Threaded sleeve 2 (used to secure the hedge trimmer to the shaft)
15. Impact protector
6. Do Not Force Pole Trimmer – It will do the
job better and with less likelihood of a risk of
injury at the rate for which it was designed.
7. Do Not Abuse Power Cord – Never carry
Pole Trimmer by power cord or yank it to
disconnect from receptacle. Keep power cord
from heat, oil, and sharp edges.
8. Make sure the blades are not touching any-
thing before starting the telescoping hedge
trimmer.
GB-7
Publicité
Table des Matières
