Flow Chart; Electric Drawing And Remote Panel - Aqua-Base XD Série Manuel Utilisateur

3.2 – FLOW CHART
3.3 – ELECTRIC DRAWING AND REMOTE PANEL
REP. DESCRIPTION
30 Green selector switch
31 Red selector switch
32 Blue selector switch
32 Salinometric indicator
33 Start signal lamp
34 Stop signal lamp
35 Rinsing signal lamp
36 Production signal lamp
37 Discharge signal lamp
38 Connector 4P
39 Connector 8P
40 Salinometer card
41 Fuse
See the Remote panel in ANNEXES page 52.
See the Electric drawing in ANNEXES page 52.
FUNCTION
Starting up of the unit.
Stopping of the unit.
Flushing automatic (option).
Shows the quality level of the produced water with four LEDS (green, green, orange, red).
Green LED indicating that the unit is on.
Red LED indicating that the unit is off.
Yellow LED indicating that the unit is in rinsing position.
Green LED indicating that the reject valve is in « production » position.
Red LED indicating that the reject valve is in « discharge » position.
Insures connection of automatic flushing system.
Insures connection of the remote panel.
Measures the salinity of the produced water with a cell ; shows the measure with the LED indicator
(green, red). Shows the functioning of the unit with LED : ON – OFF – RINSING.
Protection of the electric box.
J:\Etude-3d\Aquaset\0-DOSSIER TECHNIQUES\1-sw-plaisance\AQUA-BASE X 2008\09-Manuel utilisateur\AQUABASE XD FRUKES 02-2009-D.doc
FR/UK/ES Page 20/20
VERSION 2009-02-D