Cameo CLPSTMINI3WTRI Manuel D'utilisation page 14

RGB
00 - 99 speed adjustable.
COLOUR FADING MODE
Press the mode button to select Fade mode. The unit will then run in colour fade mode. Press the up and down buttons to select the fade speed from 0-99.
RGB
00 - 99 speed adjustable
SOUND ACTIVE MODE
Press the mode button to select sound mode. The unit will then run via the sound. Press the up and down buttons to adjust the sound sensitivity levels.
RGB
00 - 99 sound sensitivity adjustable
SLAVE MODE
Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit will follow in sequence with the master unit.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX ADDRESS SETTING MODE.
Press ENTER to access edit mode (the last 3 figures will blink). Use the UP and DOWN buttons to set the DMX address (A001 - A512).
Press ENTER to confirm.
14
7COLOR
00 - 99 speed adjustable.
7COLOR
00 - 99 speed adjustable
7COLOR
00 - 99 sound sensitivity adjustable
STROBE
00 - 99 speed adjustable.
STROBE
00 - 99 speed adjustable