August View Doorbell Cam Manuel D'installation Et D'utilisation page 13

11. Mark the holes
• Align the mounting plate with your mark on the wall.
• Using a pencil or other marking device, mark the location of the two screw holes in the
mounting plate.
• Remove the mounting plate from the wall.
12.. Drill the holes (if necessary)
• Some surfaces, like wood and composite siding, may not require drilling holes first.
You may be able to simply screw in the included screws.
• Refer to the drill bit chart to determine what type of installation is appropriate for
your wall.
Mark in these screw holes
12