Installation Of The Sludge Removal Module (Optional); Scope Of Supply For Optional Sludge Removal Module - Graf ANAEROBIX Mode D'emploi

5. Installation of the sludge removal module (optional)

5. Installation of the sludge removal module (optional)
The Anaerobix in the Herkules tank can be equipped with an additional sludge removal module. Through
the opening of a valve, sludge at the base of the tank can be routed from the Herkules into a separate
shaft.
We recommend using DN 100 fittings for the sludge removal module. DN 50 and DN 63 valves are also
available from Otto Graf GmbH.
5.1

Scope of supply for optional sludge removal module

Pipe fittings
DN 110 gate valve
19 / 44