Operation
• Air passing through the ventilation duct must not be preheated by any source of
heat.
• The ventilation duct must be kept free from any obstacles. Especially portable
multi socket outlets or portable power supplies, which can get warm, must not
be kept at the rear of the cooling device.
6.1
Fixing the cooling device
➤ Fix the cooling device through its fixing feet as shown (fig. 2, page 2).
6.2
Changing the decorative plate
➤ Change the decorative plate as shown (fig. 4 to fig. 7, page 4).
6.3
Mounting the sliding hinge (optional)
You can mount a sliding hinge that allows the cooling device door to be opened at
the same time as the door of the built-in cabinet.
➤ Mount the sliding hinge as shown (fig. 8, page 5, to fig. l, page 8).
6.4
Reversing the door
➤ Reverse the door as shown (fig. m to fig. q, page 9).
or ...
➤ Reverse a door with a sliding hinge as shown (fig. o and fig. p, page 9).
7
Operation
!
CAUTION! Health hazard
Food may only be stored in its original packaging or in suitable
containers.
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, service agent or
similarly qualified person to avoid hazard.
16
RH430, RH440
EN