Transmitter Battery Installation - Skytec 179.165 Mode D'emploi

MICROPHONE-TRANSMITTER FEATURES
BODY-PACK TRANSMITIER FEATURES

TRANSMITTER BATTERY INSTALLATION

1.
Battery Installation of Handheld Microphone: Push open the battery cover, Insert the supplied batteries into
battery jar in polarity and cover the battery Cover.
2.
Battery Installation of Body pack transmitter: Push open the battery cover, Insert the supplied batteries into
battery jar in polarity and close the battery cover.
1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise.
2. Battery Cover: Open it to install the battery.
3. Low Battery Indicator: Red light glows when it is lack of power and should Renew
the battery.
4. Power and Audio Mute Switch.
1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Bell Clip: Allach the transmitter to the belt.
4. Audio Input Jack: it is suitable for lavaliere system/headset
system.
5. Low Battery Indicator: Red light glows when it is lack of power
and should renew the battery.
6. State Setting Switch: Set the using slate of lavaliere system (L) /
headset system(H).
7. Gain Adjusting Volume: Adjust the transmitter audio input gain.