Warranty - Tripp-Lite SU140KMBPK Manuel D'installation Et D'utilisation

10. Reference Materials
TO UPS
BYPASS UNIT
NOTES:
1. "SW1" UPS INPUT BREAKER.
2. "SW2" MAINTENANCE BYPASS BREAKER.
3. "SW3" MAINTENANCE ISOLATION BREAKER.
4. ALL INTERNAL CONNECTIONS BETWEEN "SW1", "SW2" AND "SW3" ARE MADE USING COPPER BUS BARS.
5. 600A RATED NEUTRAL BUS PROVIDED WITH MECHANICAL LUGS THAT ACCEPT A TOTAL OF (4) #6 – 500 MCM CABLES.
6. GROUND LUG ACCEPTS (3) #6 – 500 MCM CABLES.
7. MECHANICAL LUGS USED FOR THE UTILITY INPUT AND THE OUTPUT LOAD HAVE THE SAME WIRE RANGE AS THE CIRCUIT BREAKERS.
8. THIS DRAWING IS TO BE USED FOR ELECTRICAL PURPOSES ONLY AND DOES NOT REPRESENT THE ACTUAL MECHANICAL LAYOUT OF THE EQUIPMENT.
BREAKER TYPE
CUTLER HAMMER SERIES C
MECHANICAL LUG CONNECTIONS
INPUT
OUTPUT
NEUTRAL
GROUND

11. Warranty

LIMITED WARRANTY AND EXCLUSIONS
Tripp Lite strives to produce quality products at reasonable prices. If you are not satisfied with our product because of a defect, we will repair or replace the defective part or parts
free of charge for a period of one year from the date of purchase. In the event you claim that the product contains a defect, simply notify Tripp Lite of the defect, and we will arrange
for repair or replacement. The sole and exclusive remedy against Tripp Lite relating in any way to a product defect shall be the repair or replacement of defective parts as provided
for under this LIMITED WARRANTY. No other remedy, including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss, is available. This LIMITED WARRANTY shall not be deemed to have failed of its essential purpose so long as Tripp Lite is willing and able to
repair or replace defective parts in the manner prescribed in this LIMITED WARRANTY.
Certain integrated products, which are not manufactured by Tripp Lite, will be warranted by the applicable manufacturer. These warranties shall be between the
manufacturer and the user. Terms and conditions may vary. These integrated products include, but may not be limited to, the following products: Batteries, Inverters
and UPS Systems.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
Any action for breach relating to the sale of a Tripp Lite product must be commenced within one year after the cause of action has been accrued.
THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES ARE EXCLUDED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
UTILITY INPUT
CIRCUIT BREAKER SUMMARY
BREAKER MODEL
HLD3600
WIRE RANGE & TORQUE VALUE SUMMARY
#4 - 500 MCM
#4 - 500 MCM
#6 - 500 MCM
#6 - 500 MCM
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
OUTPUT TO LOAD
TRIP
600A 65K @ 480VAC
WIRE RANGE
8
TO UPS
AC OUTPUT
AIC WIRE RANGE
(2) 400 - 500
TORQUE VALUE
375 in-lbs. (42.4 Nm)
375 in-lbs. (42.4 Nm)
375 in-lbs. (42.4 Nm)
375 in-lbs. (42.4 Nm)
19-03-376 93-3979_RevA