Panasonic WV-CW960/G Mode D'emploi page 50

Problem
Poor picture colour
Image flicker
Afterimages in
the picture
Black and white picture
Frequent switching
between the colour and
the black and white
modes
White specks in the
picture
A circular object
appear in the picture
(when the camera is
pointing straight down)
Menu does not open.
Cause and Recommended Action
• Check the white balance setting.
• Use the special setup menu to adjust picture
quality.
• Is the dome cover or lens of the camera dirty? If so,
clean them.
• If Super Dynamic 3 is turned on, turn it off.
• Check the DNR setting.
• The camera has an auto black and white switching
mode function. Check the setting of this mode.
• Adjust the black and white mode switching level,
and the duration time setting.
• Use the PIX OFF function to perform blemish
compensation.
• This is caused by the shape of the dome cover and
is not a malfunction.
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using.
• Are camera communication settings configured
correctly?
-50-
Reference Pages
29
42
7
26-27
29
29
29
42
7
—
13-15
19-20
21