Switching Off; Temperature Regulation; Drinks Chill Function - Atag KA2411L/A01 Notice D'utilisation

Freezer temperature indicator
5
Freezer compartment indicator
6
Alarm indicator
7
Child Lock function
8

Drinks Chill function

9
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "Door open
alarm".
If "DEMO" appears on the Display, the
appliance is in demonstration mode: re-
fer to "Troubleshooting" paragraph.
4. The temperature indicators show the
set default temperature.
To select a different set temperature refer to

"Temperature regulation".

Switching off

To switch off the appliance do these steps:
1. Press the ON/OFF button for 5 sec-
onds.
2. The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug from
the power socket.
Switching off the wine cellar
To switch off the wine cellar:
1. Press the Functions button until the
corresponding icon appears.
The wine cellar Off indicator and the
wine cellar compartment indicator flash.
The wine cellar temperature indicator
shows dashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator is shown.
Switching on the wine cellar
To switch on the wine cellar:
1. Press the Functions button until the
corresponding icon appears.
The wine cellar Off indicator flashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator goes off.
To select a different set temperature refer to
"Temperature regulation".
Temperature regulation
The set temperature of the wine cellar and
of the freezer may be adjusted by pressing
the temperature buttons
Set default temperature:
• + 10°C for the wine cellar
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached within
24 hours.
Important! After a power failure the set
temperature remains stored.
Drinks Chill function
The Drinks Chill function is to be used to
set an acoustic alarm at the preferred time,
useful for example when you want to rapidly
chill a bottle of wine for a certain length of
time.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30 mi-
nutes) for a few seconds.
2. Press the Temperature colder or Tem-
perature warmer button to change the
Timer set value from 1 to 90 minutes.
3. Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Drinks
Chill indicator flashes and an audible alarm
sounds:
1. press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown:
1. Press the Functions button until the
Drinks Chill indicator flashes.
2. Press the OK button to confirm.
3. The Drinks Chill indicator goes off.
It is possible to change the time at any time
during the countdown and at the end by
pressing the Temperature colder button
and the Temperature warmer button.
17