Jci1: Chassis Intrusion Connector - MSI GAMING PRO Z170A Mode D'emploi

JCI1: Chassis Intrusion Connector

This connector allows you to connect the chassis intrusion switch cable.
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the
chassis.
2. Close the chassis cover.
3. Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
Press F10 to save and exit and then press the Enter key to select Yes.
5.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning
Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
1.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.
22
Overview of Components
Normal
(default)
Trigger the chassis
intrusion event