Overriding Programme For A Longer Period Of Time; Setting Ventilation Mode Values; Retrieving Settings; Factory Settings Connected Device - Brink WTW control Mode D'emploi

4.6 Overriding the program for a longer period of
time
A set program me can be overriden manually, for example,
during holidays. Perform the following actions to overrule the
1
program (see ):
Press return as many times as necessary to get to the
2
main screen
Press . 'Manual' appears in the display
4
Turn to set the ventilation position
1
The manual position now overrules the programme. Press re-
turn 2 if you wish to undo the manual position.
4.7 Setting ventilation mode's values
You can set a ventilation mode's value by yourself.
Perform the following actions for this (see
Press return as many times as necessary to get to the
2
main screen
Press 1 . 'User Menu' opens
Select 'Installation Settings' by turning
Press . 'Installation Settings' opens
1
Select 'Parameter' by turning
Press . 'Parameter' opens
1
Take note!
Press
1
You can set debit 1 through 3 in the same manner as descri-
Take note! You cannot feed in a value, lower than
High).

4.8 Retrieving settings

You can retrieve the current settings from the WTW control.
For this you press the info button
Take note! You can look at, but not change, the set-
tings via the info menu.

4.9 Factory settings connected device

A device has been connected to the WTW control. It is possi-
ble to set back all this device's settings to the factory settings.
Perform the following actions for this (see
1
):
1
1
1
.
.
.
.
1
1
5 (see ).
1
):
Press return as many times as necessary to get to the
2
main screen
Press . 'User Menu' opens
1
Select 'Installation Settings' by turning
Press 1 . 'Installation Settings' opens
Select 'Appl.factory.def.' by turning
Press twice. The settings are put back to the factory
1
settings.

5 Maintenance

5.1 General maintenance

Careful! Clean the screen with a soft cloth.
Careful! Never apply water and/or (cleaning) liquid to
the screen.
be cleaned or replaced when the text 'FILTER' appears on the
WTW control's display (see
Consult the manual of the device connected to the WTW con-
button
2

6 Dismantling

Warning! You are not permitted to dismantle the WTW
control or parts of the WTW control by yourself. This
may only be done by a maintenance mechanic appro-
ved by Brink Climate Systems.

7 Repair

Warning! You are not permitted to open or repair the
WTW control or parts of the WTW control by yourself.
This may only be done by a maintenance mechanic
approved by Brink Climate Systems.

8 Environment

Take note! The WTW control may not be remo-
ved as unsorted urban waste, but should be treated
separately.
Take note! Make enquiries within your own region,
where the WTW control can be handed in when use
has been terminated. Do not throw away electrical
10
1
1
).
8
1
).