Overriding Programme For A Longer Period Of Time; Setting Ventilation Mode Values; Retrieving Settings; Factory Settings Connected Device - Brink WTW Mode D'emploi

4.6 Overriding the program for a longer period of
time
A set program me can be overriden manually, for example,
during holidays. Perform the following actions to overrule the
program (see 1 ):
• Press return as many times as necessary to get to the
2
main screen
• Press . 'Manual' appears in the display
4
• Turn to set the ventilation position
1
The manual position now overrules the programme. Press
return if you wish to undo the manual position.
2
4.7 Setting ventilation mode's values
You can set a ventilation mode's value by yourself.
Perform the following actions for this (see
• Press return as many times as necessary to get to the
2
main screen
• Press . 'User Menu' opens
1
• Select 'Installation Settings' by turning
• Press . 'Installation Settings' opens
1
• Select 'Parameter' by turning
• Press . 'Parameter' opens
1
Select 'Airflow Holiday' by turning
Take note!
'Airflow Holiday' refers to ventilation mode
'Airflow Reduced' refers to ventilation mode
'Airflow Normal' refers to ventilation mode
'Airflow High' refers to ventilation mode
• Set Airflow Holiday by turning
• Press to confirm the set value for Airflow Holiday
1
You can set debit 1 through 3 in the same manner as
described above for Airflow Holiday.
Take note! You cannot feed in a value, lower than
value of a lower Airflow position, for a higher (Airflow
Holiday < Airflow Reduced < Airflow Normal < Airflow
High).

4.8 Retrieving settings

You can retrieve the current settings from the WTW control.
For this you press the info button
Take note! You can look at, but not change, the
settings via the info menu.

4.9 Factory settings connected device

A device has been connected to the WTW control. It is
possible to set back all this device's settings to the factory
settings. Perform the following actions for this (see
1
):
1
1
1
.
.
.
.
1
(see 1 ).
5
1 ):
• Press return as many times as necessary to get to the
2
main screen
• Press . 'User Menu' opens
1
• Select 'Installation Settings' by turning
• Press . 'Installation Settings' opens
1
• Select 'Appl.factory.def.' by turning
• Press twice. The settings are put back to the factory
1
settings.

5 Maintenance

5.1 General maintenance

Careful! Clean the screen with a soft cloth.
Careful! Never apply water and/or (cleaning) liquid to
the screen.

5.2 Cleaning or replacing filter

5.2.1 Filter notification

The filters in the device, connected to the WTW control,
should be cleaned or replaced when the text 'FILTER'
appears on the WTW control's display (see

5.2.2 Removing, cleaning or replacing filters

Consult the manual of the device connected to the WTW
control for removing filters.

5.2.3 Re-setting filter notification

You can reset the filter notification after you have cleaned or
replaced the filter (or the filters). For this you press the return
button for at least five seconds (see
2
The text filter on the WTW control's display disappears.

6 Dismantling

Warning! You are not permitted to dismantle the
WTW control or parts of the WTW control by yourself.
This may only be done by a maintenance mechanic
approved by Brink Climate Systems.

7 Repair

Warning! You are not permitted to open or repair the
WTW control or parts of the WTW control by yourself.
This may only be done by a maintenance mechanic
approved by Brink Climate Systems.

8 Environment

Take note! The WTW control may not be removed
as unsorted urban waste, but should be treated
separately.
Take note! Make enquiries within your own region,
where the WTW control can be handed in when use
has been terminated. Do not throw away electrical
10
1
1
).
8
1 ).