H.Koenig CAVS12 Manuel D'utilisation page 11

To minimize energy consumption, be sure to respect the filling capacity of your cooler–12 "Bordeaux
75cl" size bottles.
When you use the cooler for the first time or restart the cooler after having been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the display. This is normal and is due to the length of the activation time. Once the wine
cooler is running for a few hours everything will be back to normal.
If you are concerned that the temperature display of cooler is not correct and wish to check the
temperature you will need a special fridge/freezer thermometer. You may also need a hygrometer
to check the humidity of your cooler. These are available from most supermarkets and hardware
shops. Place the thermometer and hygrometer on the middle shelf of the electric cooler, where it
can be read easily. Leave overnight, compare the temperature of the thermometer and the display
in the wine cooler. The humidity in the cooler should be between 50%-80% RH depending on the
type of wine.
NOTE:
● When the power is connected, cooling system starts to work. The temperature is set on certain
position, which means that if the temperature of appliance reach the point set, Self-control
Temperature System stops cooling system so the temperature in the cabinet rises gradually.
● When the inside temperature rises above the set point, Cooling Self-control Temperature starts
to work again, the cooler enter into cooling circles.
● After you setting the temperature, the display will return to show the temperature in the cooler,
but it could turn to the point that you have set gradually.