Installation - GE Security SB250 Manuel D'installation

Installation instructions
To install the detectors correctly, certain rules must be followed.
Do not place the detector on an unstable support
(such as a mesh or a poorly fixed post)
Transmitter
Transmitter
3.

Installation

To attach the detectors to a metallic support, drill 4 holes measuring 3 mm and use the
sheet metal screws provided.
To fix the detectors to a wall, use appropriate screws and wall plugs for the type of wall
(we recommend at least Ø5 x 30 screws).
• Drill 4 holes and insert wall plugs.
• Position the holes in the adjustable support over the wall plugs.
Do not install receivers facing sunrise
or sunset, facing direct or reflected
rays of the sun, or alongside highly
reflective surfaces.
Channel 1
Channel 2
Receiver
Make sure that no vegetation can interrupt
the beams.
When detectors are placed one
above the other, make sure they
are configured to use different
Receiver
channels.
Receiver
5
5° min.
Transmitter