Internet Explorer Configuration; Tcp/Ip Configuration; Configuring Pc (Windows 2000) - Atlantis NetPower 303 WN Guide De Démarrage Rapide

connected to the NetPower 303 WN either directly or through an external Switch,
and have TCP/IP installed and configured to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet of the NetPower 303
WN. The default IP address of the NetPower is 192.168.1.251 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC (DHCP client) to
get an IP address from the NetPower 303 WN (DHCP server). For the first time
please connect the PC directly to NetPower 303 WN.
Please follow the steps below for PC's network environment installation. First of all,
please check your PC's network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
 Username:admin

Password: atlantis
 IP LAN address: (192.168.1.251), Subnet Mask (255.255.255.0)
 IP WAN adress: client DHCP
 DHCP Server: enalble (192.168.1.10-192.168.1.50)
 SSSID= A02-PL303-WN
 Channel=6, Authentication: WPAPSK, Encrypton: AES, Encryption Key:
NetPower303WN

7. INTERNET EXPLORER CONFIGURATION

Now open IE, go to Instruments menu, select the Connections tab and select
one of the following options:
 Never use remote connection

Use remote connection if another network connection isn't available

8. TCP/IP CONFIGURATION

Configuring PC (Windows 2000)

 Go to Start / Settings / Control Panel. In the Control Panel, double-
click on Network and Dial-up Connections.
 Double-click LAN Area Connection/Wireless.
 In the LAN Area Connection/Wireless Status window, click
Properties.
 Select Internet Protocol (TCP/IP) and click Properties.
39