Atlantis NetPower 303 WN Guide De Démarrage Rapide page 33

 Plug the PowerLine HD Ethernet Adapter directly into a 220V AC wall outlet.
Do not use an extension cord between the adapter and the AC power source.
 Do not attempt to service the PowerLine HD Ethernet Adapter yourself, as
opening or removing covers may expose you to dangerous voltage points or
other risks as well as ruin product warranty. Refer all servicing to qualified
service personnel.

Unplug the PowerLine HD Ethernet Adapter from the wall outlet and refer the
product to qualified service personnel for the following conditions:
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water
 If the product does not operate normally whenthe operating
instructions are followed
 If the product exhibits a distinct change in performance
Product warranty does not apply to damage caused lightning, power
surges or wrong voltage usage.
Check voltage before connecting to the power supply. Connecting to
the wrong voltage will damage the equipment.
High voltage is used in the equipment. Do not open enclosure,
service, or change any part of the equipment. Service can only be
carried out by qualified technical specialists. Observe safety
precautions to avoid electric shock.
33