Disposal; Manufacturer's Warranty; Fcc Statement (Applicable In Usa) - Hilti PRM 15 Mode D'emploi

Should you need to replace the tubular section, use only
Schedule-40 aluminium tubing with an outside diameter
of 25.4 mm.
Tighten the holders for the groups of magnets only when
the magnets are in position on the tube.

9 Disposal

DANGER
Improper disposal of the equipment may have serious consequences:
The burning of plastic components generates toxic fumes which may present a health hazard.
Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution.
Careless disposal may permit unauthorized and improper use of the equipment. This may result in serious personal
injury, injury to third parties and pollution of the environment.
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back old tools or appliances for recycling. Ask Hilti Customer Service or your Hilti representative for further information.
For EC countries only
Disposal of electric appliances together with household waste is not permissible.
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric appliances that have reached the end of their
life must be collected separately and returned to an environmentally compatible recycling facility.
Dispose of the batteries in accordance with national regulations. Please help us to protect the environ-
ment.

10 Manufacturer's warranty

Please contact your local Hilti representative if you have
questions about the warranty conditions.

11 FCC statement (applicable in USA)

CAUTION
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radiofrequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the distance between the equipment and re-
ceiver.
Consult the dealer or an experienced TV/radio technician
for assistance.
en
17