Design And Function - CASO DESIGN FW2000 Mode D'emploi

16 Design and Function

16.2 Assembling
In this chapter, you'll find important information on the design and function of the device.
16.1 Overview
a) Place the motor unit (1) on a table.
The locking handle (3) at tube inlet (4)
has to be in horizontal position. Place
the head tube (7) into the tube inlet (4).
b) Turn the locking handle (3) in
vertical position.
c) Place the snake (8) with the thicker
end first into the head tube (7).
d) Place the blade (9) on the snake (8).
Caso Fleischwolf FW2000
10 cutting plate medium (5mm)
12 fixing ring
11 cutting plate coarse (8 mm) 15 cutting plate fine (3 mm)
13 sausage accessory 14 dough accessory with pattern
1 motor unit
2 switch (REV,
OFF, 1, 2)
3 locking handle
4 tube inlet
5 pusher
6 hopper plate
7 head tube
8 snake
9 blade
31