Connecting The Receiver; Opening The Device - Niko 10-506 Information De Produit

10-506
5.7. Mounting upper frame
▶ Position the upper frame onto the two corners of the underframe (1).
▶ Secure the upper frame below by gently pushing (2).
ATTENTION!
Lay the conductors in such a manner that they are
not crushed when securing the upper frames.

5.8. Connecting the receiver

▶ Connect the plug on the cord with the bus (1). This is placed on the
base of the universal telephone (image 8).

5.9. Opening the device

▶ Remove the cord of the receiver from the bus (see Connecting the receiver).
▶ At the bottom of the device, there's a rectangular unlocking eyelet. Gently
push a screwdriver straight into this eyelet (image 9).
▶ Pull the upper frame loose from below (1).
▶ Lift the upper frame from the two upper corners (2).
44
Image 7: Mounting upper frame
Image 8: Connecting the receiver
Image 9: Opening the telephone
EN