Adjusting The Height Of The Upper Rack; Loading The Lower Rack - Samsung DW80H997 Série Manuel D'utilisation

using your dishwasher

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can
accommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to
8 in. (20 cm) in diameter.
1. To lower the upper rack by 2 in. (5 cm), pull
the adjust handles located at the left and
right sides of the upper rack, and then push
the upper rack downwards slightly at the
same time.
2. To raise the upper rack, just pull the upper
rack upwards. The adjuster handle will latch
and the upper rack will move to the high
position.
We recommend adjusting the height of
the upper rack before loading dishes into
CAUTION
the rack. If you adjust the the rack after
loading the dishes, you may damage the
dishes. If you do not adjust with left and right handle together, the dishwasher door may not close
properly.
Pull out the upper rack from the tub until it is fully revealed before adjusting the upper rack.

LOADING THE LOWER RACK

Load cookware (pots, pans, etc.), up to 12 in. (30 cm) in diameter into the lower rack. The lower rack has
been especially designed for dinner dishes, soup bowls, plates, pots, lids, and casserole dishes.
Load your plates into the center column of the rack so that their top sides face each other. Load large items
such as pans and pots into the dishwasher so their inner cavities face downwards. We recommend loading
cups, stemware, and small plates into the upper rack.
See the recommended loading patterns below.
8 place setting
DW80H9950-00149A-03_EN_140829.indd 16 DW80H9950-00149A-03_EN_140829.indd 16
10 place setting
English - 16
12 place setting
2014-08-29 2014-08-29 12:31:35 12:31:35