Télécharger Imprimer la page

GRE VCB10 Manuel D'instructions page 8

Nettoyeur de fond électrique
Masquer les pouces Voir aussi pour VCB10:

Publicité

Les langues disponibles

Les langues disponibles

Do Not expose to fire or intense heat as this may result in an explosion.
CAUTION!
lf a battery leak develops, avoid contact with the leaking acid and place the
damaged battery in a plastic bag.
lf acid comes in contact with skin and clothing, wash immediately with plenty of
soap and water.
lf acid comes in contact with eyes, immediately flood eye with running cool
water for at least 15 minutes. Get medical attention immediately.
How to remove the battery
The steps of changing the battery:
(1) Put the buckle to the body, and there is CLICKING; be sure the buckle does
not be connected to the button on the rear body as the Picture show.
(2) Rotate the rear body counterclockwise, and take out the large button part.
(3) You will find the triangular battery, and take it out.
(4) Use the original battery from the manufacturar, and install the battery rightly,
and rotate tightly. Pay attention to the installation
(5) Rotate the rotation cover on the rear body to the buckle position on the
bottom after being sure that the battery has been installed rightly ( check it
by operating the electric cleaner).
(6) Put the small buckle to cover position on the rear, and it will have
CLICKING. Guarantee the buckle rotated tightly.
(7) It is really important that this zone is well closed
(8) Now you can use your electric cleaner following the instructions of how to
use the electric cleaner.
7

Publicité

loading