Surface Maintenance - Zephyr Essentials Anzio Island Guide D'utilisation, D'entretien Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SURFACE MAINTENANCE:

Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and buff
out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Do not use any product containing chlorine bleach. Do not use "orange" cleaners.
Aluminum Mesh Filters
They need not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if
heavily soiled.
Removing Aluminum Mesh Filters
prolonged use, replace with the following
part number:
Hood Model:
Part No.
ZAZ-M90BS
50200038
ZAZ-E42BS
50200038
Qty.
2
3
16
www.zephyronline.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zaz-m90bsZaz-e42bsAnzio island zaz-m90bsAnzio island zaz-e42bs

Table des Matières