Care And Maintenance - Blaupunkt BP-GIK04 Manuel D'utilisation

BP-GIK04
4. Operation
4.1. Introduction
This insect killer uses a UV light to attract flying insects. The fan will suck these insects into the container and
dry them. This insect killer does not produce any noisy electric shocks nor does it emit any toxins, smoke, scent
or radiation.
This insect killer is designed to be used outdoors (garden, terrace...).
4.2. How to Use
1. Install the insect killer on a stable and non-slippery surface or hang on a height of 50-100 cm above the
ground.
2. Connect the insect killer to the power source.
3. Disconnect from the power supply after use.
For best results, turn off other light sources and prevent from installing the appliance in the draught.
5. Troubleshooting
Appliance does not start
Appliance does not light

6. Care and Maintenance

Storage
Store the appliance and its accessories in a clean and dry area.
Cleaning
The cleaning frequency depends on the intensity of use. Check the tray of the device at least once a week.
Clean more often if necessary.
Before starting any cleaning or maintenance activities, unplug the appliance from its power source, wait for
5 minutes and let it cool down.
BP-GIK04.indd 3
Problem
Power supply not connected well
On-off button not pressed
Power supply not connected well
PCB board is damaged
Noisy fan Foreign objects in the fan
Reason
Light is damaged
PCB Board cannot be replaced; scrap
3
Possible solution
Reconnect the power supply
Press the on-off button
Reconnect the power supply
Light source cannot be replaced;
scrap the appliance
the appliance
Clean the fan
09/11/2021 12:55:27