Brandt BFU862YNW Manuel D'instruction page 50

2.2 SUPER: Select and deselect super mode
Press "SUPER" button to select super mode. After 5 seconds flashing of
super mode icon, super mode is selected.
When super mode is selected, super mode icon will light on, and display
window will show -25° C.
In super mode, touching "FREEZER" button, super mode icon will flash 3
times, but freezer temperature can not be changed.
To exit Super mode,
- Press "SUPER" button to deselect Super mode,
- Or after 50 hours of super mode without any operation, the refrigerator will
automatically stop it and enter to previous setting.
Warning:
In super mode, noise of the appliance may be slightly higher than normal
running.
2.3 ALARM/ECO: clear door opening alarm and high temperature alarm,s elect
and deselect ECO mode
Short touching "ALARM/ECO" button to clear door opening alarm and high
temperature alarm.
Touching "ALARM/ECO " button for 3 seconds to select ECO mode. After 5
seconds flashing of ECO mode icon, ECO mode is selected.
When ECO mode is selected, ECO mode icon will light on, and display
window will show different preset temperatures, depending on the ambient
temperature (Ta) of where the appliance be placed, as below.
Ambient
≤ 13° C
Temperature T
a
(T )
a
Preset
-18° C
Temperature
In ECO mode, "FREEZER" button will not respond to any touching.
Touching "ALARM/ECO" button for 3 seconds to deselect ECO mode.
2.4 LOCK: Locking and unlocking
Touching "LOCK" button for 3 seconds to lock the control panel, then the
locking and unlocking icon will be "
≤ 20° C
14° C < T 21° C < T
a
-18° C
≤ 27° C
28° C < T
a a
-18° C -16° C
".
50
≤ 34° C
T > 35° C
a
-15° C