Brandt BFU862YNW Manuel D'instruction page 37

good condition
optimise your
consumption by following
the instructions in this
installation
guide.
INSTALLATION
 If your appliance is fitted
with casters,
remember
should only be used for
short movements. Do not
move the appliance over
long distances
casters.
 Clean
the
before connecting it to
the mains. Always unplug
your appliance
any maintenance work.
Never pull on the power
cord, but only on the plug
itself.
 Install the appliance in a
dry and well ventilated
place.
 Avoid
verandas and
because excessively high
and low temperatures in
the summer
winter can prevent your
appliance
functioning properly, or
even damage it.
 Do
not
appliance near a source
of heat, such as an oven
or a radiator.
 Leave at least 3 and 5
cm clear around the sides
and
energy
circulate freely.
and user
then
that they
on its
appliance
before
balconies,
patios,
and the
from
place the
and 10 cm above the appliance to
allow the
Place the appliance

at a suitable distance
from the wall using the
spacers contained in
the bag of accessories.
Your appliance

designed
optimally at
ambient temperature. In
this case, it is said to be
designed for a particular
"climate class".
climate class is shown on
the ID plate inside the
appliance, on the bottom
of the left hand wall.
Beyond
temperatures,
performance
appliance may suffer.
Class Ambient
temperature
SN + 10° C to + 32° C
N + 16° C to + 32° C
ST + 16° C to + 38° C
T + 16° C to + 43° C
Tips:
Once the appliance
installed, adjust the feet so
that it is slightly inclined
rearwards. In this way, it
will be easier to close the
door.
Before putting any food in
the fridge,
appliance
37
air to
is
to function
a given
The
these
the
of your
is
clean the