Troubleshooting - Rockwell Automation SLC 5/01 Notice D'installation

Load Your Software
Refer to your programming software documentation.
Establish Communications with the Processor
1. Connect the 1747-PIC to the processor and your personal computer.
2. Set the communication parameters of the software to match the default
parameters of the processor:
— DH-485
— 19.2k baud
— Node Address = 1

Troubleshooting

Before troubleshooting your SLC 500 system, please obtain an SLC 500 Modular
Hardware Style Installation and Operation Manual (1747-6.2) from one of the
sources listed on page 3. Refer to the chapter on Troubleshooting.
In addition to the SLC 500 Modular Hardware Style Installation and Operation
Manual, the SLC 500 and MicroLogix 1000 Instruction Set Reference Manual
(1747-6.15) may also be obtained from the sources listed on page 3. This manual
contains explanations and examples for the entire instruction set as well as for all
status words and bits. It also contains explanations for all possible fault codes
found in status word S:6.
9
Publication 1747-5.25