Required Tools And Equipment; Safety Considerations - Rockwell Automation SLC 5/01 Notice D'installation

6

Required Tools and Equipment

• medium blade screwdriver
• programming equipment
• a 1747-PIC, 1784-KTX, or 1784-PCMK communication interfaces

Safety Considerations

ATTENTION: Never install, remove, or wire any module while
power is applied. Also, do not expose processor modules to
!
surfaces or other areas that may typically hold an electrostatic
charge. Electrostatic charges can alter or destroy memory.
For general recommendations concerning installation safety requirements and
safety related work practices, refer to the requirements specific to your region.
• Europe: Reference the standards found in EN 60204 and your national
regulations.
• United States: refer to NFPA 70E, Electrical Safety Requirements for
Employee Workplaces.
Important: See page 10 for information on proper battery handling, storage, and
transporting.
Publication 1747-5.25