Operation And Control; Operation Conditions; Plug Descriptions; Introduction - Garland GIU2.5 BI Manuel D'installation Et D'utilisation

Table des Matières

Publicité

DIMENSIONS AND SPECIFICATIONS, Continued

Operation And Control

Lamp operation 24V DC/max. 40mA (Green)
Output regulator - Potentiometer 10k Ohm

Operation Conditions

Max. Tolerance Of The Nominal
Supply Voltage
Supply Frequency
Protection Class
Minimal Diameter Of The Pan

INTRODUCTION

Application

The following instructions contain information, which
is fundamentally important and must be taken into
account during assembly, operation and maintenance.
They must therefore read very carefully before installation
and operation by the responsible specialist staff and the
operator(s). They must always be available for consultation at
the place of operation.

Purpose of induction cookers

The Garland induction unit cookers are especially suitable
as cookers in the kitchen and for the preparation of meals
on the table. A cooker can be used for cooking, warming up,
keeping warm, flambéing, roasting, etc. The cookers are to
be used only with pans made of material which is suitable for
induction. There are specific manufacturers who sell special
types of pots and pans for induction cooking.
NOTE: For Wok models, only use supplied pans or "Spring of
Switzerland" wok pans. Other pans may not have the same
shape as the ceramic wok bowl, causing overheating and
cracking of the ceramic.
DO NOT use induction cookers to heat up any other
metallic objects other than pots and pans provided for it.
Page 8

Plug Descriptions

+6/-10%
50/60 Hz
1P 43
5" (127mm)

Description of products

We manufacture several basic types of induction cookers
with various performances and measurements. All are
built to last; they are also compact and powerful with a
revolutionary technology in a complete case of stainless
steel. All of our accessories are designed to coordinate with
the induction units and since each unit is equipped with
continuous control, they allow efficient cooking.
Features include:
Simple operation with rotary switch
Compact powerful electronics enable flat construction and
safe operation
A maximum of safety thanks to multiple safety functions
Short cooking time
Electronic checking
Compact measurement – light weight
Meets all current standards: VDE EN 60335-1/-2/36, CE-
conforming
UL197; CAN/CSA/C22.2 No., 109, NSF 4-1996
208/240 volt,
single phase, 15
amp
208/240 volt,
single phase, 20
amp
5
Part # 4520895 (01/31/08)
208 volt,
3 phase,
20 amp
208 volt,
3 phase,
30 amp
208 volt,
3 phase,
50 amp.

Publicité

Table des Matières
loading

Table des Matières