Practical Cooking Advice - Whirlpool AXMT 6534/IX Mode D'emploi

Programming cooking
A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the button several times until the
and the three digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards "+" and "-" to adjust
the duration.
3. Press the button again to confirm;
4. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will
stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
A cooking duration must be set before the cooking
end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Next, press the button until the
two digits on the DISPLAY begin to flash.
3. Turn the TIMER KNOB towards "+" and "-" to adjust
the hour value.
4. Press the button again until the other two digits
on the DISPLAY begin to flash.
5. Turn the TIMER KNOB towards "+" and "-" to adjust
the minute value.
6. Press the button again to confirm.
7. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed, while the end time is set
to 12:30. The programme will start automatically at
11:15 a.m.
Programming has been set when the
buttons are illuminated. The DISPLAY shows the
cooking end time and the cooking duration alternately.
To cancel programming, turn the SELECTOR knob to
the "0" position.

Practical cooking advice

Do not place racks in position 1 and 5 during fan-
assisted cooking. This is because excessive direct
heat can burn temperature sensitive foods.
In the SPIT ROAST and ROASTING cooking modes,
place the dripping pan in position 1 to collect cooking
residues (fat and/or grease).
icon
MULTILEVEL
• Use positions 2 and 4, placing the food which
requires more heat on 2.
• Place the dripping pan on the bottom and the rack
on top.
After selecting any of the oven programs, the parame-
ter setting of the product is activated. It optimizes the
performance of cooking, but could result in a delayed
ignition of fan and heating elements.
Spit roast
icon and the
oven.
3. Start the spit roast function by selecting the
symbols.
When this mode is enabled, the rotisserie spit will
stop if the door is opened.
and
To operate the spit roast
function ( see diagram )
proceed as follows:
1. Place the dripping
pan in position 1.
2. Place the rotisserie
support in position 3
and insert the spit in
the hole provided on
the back panel of the
GB
27