Amana AGC6540KF Instructions D'utilisation page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you experience
Recommended Solutions
Flame too high
or too low
Excessive heat around
cookware on cooktop
Cooking results are not
what was expected
8
Ensure the cooktop gas supply is correct (LP or Natural gas). These cooktops come from the
factory set for Natural gas.
Refer to the Installation Instructions to verify that the pressure regulator is installed correctly
and the line pressure and the gas line pressure are correct.
Be sure the cookware is approximately the same size as the cooking area and surface burner.
Cookware should not extend more than
Adjust the flame so that it does not wrap around the cookware.
Be sure the proper cookware is being used. Refer to the "Cookware" section.
Check the heat level. Refer to "Excessive heat around cookware on cooktop" in this section.
Check that the cooktop is level. Refer to the Installation Instructions.
1
/
" (13 mm) outside the cooking area.
2

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Agc6556kfAgc6356kfw

Table des Matières