Mounting Instructions - Deskshaper Pro BIS514 Mode D'emploi

NL

3. MOUNTING INSTRUCTIONS

STEP 1
Open the box, place (H) and (C) in the hole
with the foam side in the box and remove
the whole piece from the foam lid.
STEP 2
Take (B) out of the box.
STEP 3
Remoce (A) from the foam, place (A) on the
foam and check if (A) is in a fully balanced
position.
STEP 4
Place (B) in the bottom of (A), place A on the
basis of the four holes from side to side.
STEP 5
Place (B) in the bottom of (A), align the four
holes.
- 6 -