Publicité
Les langues disponibles
Les langues disponibles
Important information
Carefully read the installation instructions in full before
installation.
Please keep instructions for future reference and hand them over
to any new user.
Safety
• If repair work is needed, disconnect from mains supply and
ensure that it cannot be reconnected unintentionally.
• Only use a bulb compatible with the light fixture. It must not
exceed the stated electrical power.
• If the cable is damaged, disconnect from mains supply and
contact a qualified electrician.
• Do not use incandescent bulbs due to accumulation of heat.
Installation
• Installation must be made by a certified electrician or the
product must be installed within the guidelines of the National
Electrical Code.
• The product is for indoor use only.
• When connecting the cable, the junction box must be accessible
after installation.
• Insert a bulb (not supplied) into the light fixture. Recommended
bulbs are listed on the product labels and in the maintenance
and service section of the instructions.
Product
• This product has been designed for use with VELUX sun tunnels
TGF/TGR and TMF/TMR. The connection to other products may
cause damage or malfunction.
• The product has been designed with UL listed parts and is UL
recognized with some conditions for acceptablity.
Labels
The two enclosed labels with technical bulb information about
light kit ZTL must be installed on the ceiling ring. These labels
must be visible when accessing the light kit for bulb replace-
ments.
2 VELUX
Publicité
