Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Technical Information
Maintenance
To maintain optimum performance and minimize wear, the user should clean this product
regularly. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean the Net-X, do the following:
1. Unplug the panel from power.
2. Wait until the unit is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Make sure all connections are thoroughly dry before reconnecting power and signal
cables.
·
Keep the environment around the Net-X free of dust, dirt, water, and extreme
temperatures.
·
Insert and remove DMX and Neutrik® etherCON® cables slowly and gently.
·
Put the Net-X on the top of any stacks of equipment, or rack mount it.
·
Turn the Net-X off when it is not in use.
Always dry the external surfaces carefully after cleaning them.
Net-X User Manual Rev. 5
Technical Information
Page 21 of 65
Publicité
Table des Matières
