Mounting; Orientation; Mounting Diagram; Installation Guidelines - Chauvet Professional Net-X Manuel D'utilisation

Masquer les pouces Voir aussi pour Net-X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mounting

Before mounting this product, read and follow the Safety Notes. For our Chauvet line of
mounting clamps, go to www.trusst.com/productcategory/accessories-clamps/.

Orientation

Always mount this product in a safe position and make sure the menu and the ports are
accessible and there is adequate room for ventilation, configuration, and maintenance. The
Net-X fits nicely in a standard 19" rack, can be suspended upright or upside down, or it can
be placed on its rubber feet on a flat level surface.
Use the following guidelines when mounting the Net-X:
·
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
·
When hanging this product, always secure to a fastening device using a safety cable.
·
Leave enough slack on the cables to prevent tension and pull on the plugs.

Mounting Diagram

Safety Cable

Installation Guidelines

The Net-X is used as part of a control system for operating various lighting and multi-media
products. The physical and digital construction of the control network is determined by the
location and signal needs of the products.
When designing a control system that uses the Net-X, consider the following:
·
Placing the Net-X so the menu and ports can be accessed
·
Running the cables so there is no tension or pull on the cables or plugs
·
Planning a large control system carefully before configuring the components,
so IP address, DMX address, and other identifiers are not duplicated
Net-X User Manual Rev. 5
Mounting Clamp
M12 Threaded
Mounting Hole
Removable Ears
for Rack Mounting
Setup And Installation
Page 12 of 65

Publicité

Table des Matières
loading

Table des Matières