Baltic 150N LIFEJACKETS Mode D'emploi page 10

Masquer les pouces Voir aussi pour 150N LIFEJACKETS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
ENGLISh
150N INFL ATABLE LIFEJACKET
This level is intended for general application or for use with foul weather clothing. It will turn an
unconscious person into a safe position and requires no further subsequent by the user to maintain
this position.
ImPoRTANT INFoRmATIoN!
Lifejackets only reduce the risk of drowning. They are not guaranteed to save lives. When wearing
waterproof clothing (sailing clothing, flotation suit etc.), the lifejacket's functionality may be impaired,
e.g. the ability to turn over.
This is not a lifejacket until fully inflated. An uninflated lifejacket offers no safety to the wearer. If
the gas inflation fails, the wearer must be aware that the lifejacket can be inflated using the mouth
inflation tube.Train yourself in the use of the device. The lifejacket is put on like a jacket and is worn
outermost. Secure using the front buckle and crutch strap buckle. Adjust the waistband/crutch strap
to be as tight as possible without being uncomfortable. The lifejacket can be attached to a sailing
jacket using the three plastic toggles. The lifejacket must be worn over any safety harness. There is
a whistle inside the protective cover. The emergency light (optional) is activated automatically upon
immersion. The emergency light is located on the left hand side of the lifejacket, inside the protective
cover. The sprayhood (optional) is located behind the neck, under the protective cover. Pull the spray-
hood over your head and secure with the elastic around the bottom of the lifejacket.
The lifejacket must be inspected and serviced at least annually by a Baltic service station. Alter-
natively you can carry out a personal inspection. Please refer to www.baltic.se for full instructions.
Temperatures under +5°C, can slow the inflation time. Do not use the lifejacket as a cushion. Store
the jacket in a well-ventilated and dry area. Clean the lifejacket regularly by rinsing it in fresh water;
10
take care not to trigger the automatic valve. The estimated life span for the lifejacket is 10 years.
Size:
40-150 kg. Girth of 70 cm to 150 cm.
Note! CO
Note! The references to pictures in this manual are marked with a
structional pictures at the start of this manual.
AREAS oF USE
For use inshore and offshore with foul weather clothing.
oVERALL FUNCTIoN
The lifejackets has either a zipped outer cover or a velcro enclosed cover. Both opens automatically
upon inflation. The zipped cover can also manually be opened via the two quick release devices – one
next to the gas inflation mechanism
see "Repacking". The lifejacket has an integrated inflatable lung, which provides 165N of buoyancy
when fully inflated.
cylinders are dangerous goods and shall be kept away from children and not misused.
2
1
and one by the mouth inflation tube
. You will find the in-
X
. For repacking,
2

Publicité

Table des Matières
loading

Table des Matières