General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Hydrocor WM Série Notice D'utilisation

Hydrocor WM

General information

1. General information
The original operating instructions were drafted in
German.
The operating instructions in other languages have been
translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the following
models of the Hydrocor WM potable water storage
cylinder:
Type
120
160
200
1.2

Extent of supply

Please check your delivery for any damage caused during
transit and for completeness.
Items included in the delivery:
•
Hydrocor WM potable water storage cylinder
•
Type plate (to be affixed to the potable water storage
cylinder)
•
Oventrop logo (to be affixed to the potable water
storage cylinder)
•
Connection scheme (to be affixed to the potable water
storage cylinder)
•
ErP label (to be affixed to the potable water storage
cylinder)
•
Operating instructions (to be handed over to the end
customer)
•
ErP data sheet (to be handed over to the end
customer)
1.3

Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www.oventrop.com
Technical services
Phone: +49 (0) 29 62 82-234
1.4

Declaration of conformity

OVENTROP GmbH & Co. KG hereby declares that this
product complies with the basic requirements and other
relevant provisions of the EU Directives concerned.
139501080-V02.09.2021
Item no.
1395010
1395011
1395012
1.5

Symbols used

Highlights important information and further
explanations.
f
Action required
•
List
1
Fixed order. Steps 1 to X.
2
Z
Result of action

2. Safety-related information

2.1

Correct use

Operating safety is only guaranteed if the product is used
correctly.
The Hydrocor WM potable water storage cylinder is used
to heat and store potable water.
Any other use of the product will be considered incorrect
use.
Claims of any kind against the manufacturer and/or its
authorised representatives due to damage caused by
incorrect use will not be accepted.
Observance of the operating instructions is part of
compliance with correct use.
2.2

Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger
Possible consequences if the danger occurs or the
warning is ignored.
!
Ways to avoid the danger.
The signal words identify the severity of the danger arising
from a situation.
DANGER
Indicates an imminent danger with high risk. The
situation will lead to death or serious injury if not
avoided.
NOTICE
Indicates a situation that may lead to damage to property
if not avoided.
2.3

Safety notes

We have developed this product in accordance with
current safety requirements.
Please observe the following notes concerning safe use.
2.3.1 Design of potable water heating
systems
When designing a potable water heating system, the
17