Sunex Tools SX1819TV Mode D'emploi page 5

TROUBLESHOOTING
1. Rivet mandrel is gripped by the jaws but the rivet can not be set and mandrel can not be bro ken:
CAUSE: Low air pressure or loss of hydraulic fluid.
REMEDY: Increase air pressure to 7 bar (100 psi) maximum at tool. Make sure all fittings including rear gland and head are tight. If malfunction persists, call
authorized Sunex Tools ® warranty center.
2. Mandrel does not fit completely into nosepiece or fails to eject:
CAUSE: Jaw Housing distance incorrect.
REMEDY: Loosen the head and check the rated stroke length. If shorter, search for worn or damaged o-rings and replace it.
CAUSE: Jaws are dirty or damaged.
REMEDY: Clean or replace the jaws.
CAUSE: Fatigued jaw pusher spring.
REMEDY: Replace the jaw pusher spring.
CAUSE: Fatigued Return Spring.
REMEDY: Replace the return spring.
CAUSE: Air leakage in vacuum system.
REMEDY: Search for worn or damaged seals in the vacuum system and replace it.
3. Tool takes more than two strokes under ideal con di tions to set rivet and break mandrel:
CAUSE: Low air pressure.
REMEDY: Increase air pressure but do NOT exceed 7 bar (100 psig) at tool.
CAUSE: Loose Nosepiece or improper size of nose piece.
REMEDY: Tighten nosepiece or use right size.
CAUSE: Rivet body too long for the thickness of the joint.
REMEDY: The rivet body should be 3-6mm longer than the thickness of joint only.
If malfunction persists, call an authorized Sunex Tools
For a complete listing of Authorized Master Repair Centers, visit www. sunextools.com.
LIMITED WARRANTY
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS ®
BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools ® branded products which fail to give satisfactory service due to defective
workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools ® will repair or replace at our option any part or unit which
proves to be defective in material or workmanship.
Other important warranty information...
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or
replacement made by anyone other than Sunex Tools ® or its authorized warranty service centers. The foregoing obligation is Sunex Tools ® sole
liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. Return equipment or parts to Sunex Tools ® , or an authorized warranty service center, transportation prepaid. Be certain to include
your name and address, evidence of the purchase date, and description of the suspected defect.
If you have any questions about warranty service, please write to Sunex Tools ® . This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools ® products regardless
of whether or not the product is still covered by a warranty plan.
SHIPPING ADDRESS: Sunex Tools • 315 Hawkins Rd. • Travelers Rest, SC 29690
MAILING ADDRESS: Sunex Tools • P.O. Box 1233 • Travelers Rest, SC 29690
SX1819TV: Parts Breakdown & Operating Manual
®
war ran ty center.
5 Rev. 11/7/16