ROBLIN Vitral 600 Mode D'emploi page 9

USE
T1
Button Function
Turns the Motor off.
T1
T2 Turns the motor on at speed one
T3 Turns the Motor on at speed two
Press and hold for 2 seconds to enable
shutdown
(Motor+Lights). It is possible to change the
operating speed when this function is
enabled.
T4 Turns the Motor on at speed three
Press and hold for 2 seconds to activate
Intensive speed, which is timed to run for
10 minutes. At the end of this time it will
automatically return to the speed set before.
Suitable to deal with maximum levels of
cooking fumes.
L Turns the Lighting System on and off at
maximum intensity.
Press and hold for 2 seconds to turn the
Lighting system on and off at reduced
intensity.
EN
Control panel
T2 T3
with a 30 minute
T4
-
Buttons T1+T2 are on.
Buttons T1+T3 are on.
The respective buttons T1+
delay (T2 or T3 or T4) will flash.
Buttons T1+T4 are on.
The button flashes.
Button on
Button on
L
9 9