After-Sales Service - Moulinex Soup & Co LM906110 Mode D'emploi

• Never exceed the maximum
quantity indicated in the
instructions.
• Put the appliance away once it
has cooled down.
 AFTER-SALES SERVICE
• For your safety, do not use
accessories or spare parts other
than those provided by the
approved after-sales service
centres.
BEFORE FIRST USE
Your appliance has 3 operating modes:
• Automatic program mode: temperature, cooking
and mixing times are pre-programmed to make
soups and to carry out automatic steam cooking.
• Manual Mode: personalised adjustments in
temperature and cooking time for one use can be
made according to your preferences.
• Blender Mode: select the motor speed without using
the cooking function to make some tasty smoothies
or cocktails.
Positioning of the jug and the lid unit
• Before using for the first time, wash all the
accessories (D, E and F) in hot soapy water except
for the motor unit (A).
• Make sure that all packaging is removed before
operating the appliance.
• Place the seal on the lid (Cf. Fig. 1).
• To steam cook, put the basket with the sliced
vegetables in position and fill up the jug with 0.5
litres of cold water without exceeding the bottom
of the basket (Cf. Fig.13 a; b; c).
• Position the lid (E) on the jar (D) (Cf. Fig. 2), lock the
lid without pressing by turning it in the direction of
the arrow (Cf. Fig. 3).
• Position the blender jar (D) on the motor unit (A)
until you hear it click (Cf. Fig. 4).
• The appliance only starts up once the jug and
lid are correctly in place and are locked onto the
motor unit.
• Any intervention
than normal cleaning and
maintenance by the customer
must be performed by an
Approved Service Centre.
In the event of incorrect positioning or locking of one
or the other (Cf. Fig. 5 and 6), the lock sign
to flash when you activate a function.
Installing the blade assembly in the jar (*depending
on the model)
• Fitting the removable blade assembly (*depending
on the model Cf. Fig. 11 a; b; c):
1. Make sure that the seal is properly positioned over
the blade assembly (Cf. 11.a).
2. Pick up the blade assembly using a cloth and place
it in its slot at the bottom of the jar, making sure
you carefully position the blade assembly grips in
the jar grooves (Cf. 11.b).
3. Return the jar keeping the blade assembly in its slot
(Cf. 11.c).
4. Lock the blade assembly section using the locking
ring (Cf. 11.c).
• Dismounting the removable blade assembly
(*depending on the model Cf. Fig. 11.d):
Place the jar on a work surface.
1. Use a cloth to help hold the blade assembly.
2. Return the jar while holding the blade assembly.
3. Turn the locking ring to unlock the blade assembly.
Warning: the blades are very sharp: handle them
with care so as not to injure yourself whilst fitting,
dismounting and cleaning the jar and the blade
assembly.
13 13
other
starts
START START