Troubleshooting; Authorized Representative - Cuda Fiberoptics MD-150T Manuel D'utilisation

11. TROUBLESHOOTING

Problem
The power is on, but
lamp will not ignite.

12. AUTHORIZED REPRESENTATIVE

RMS UK, Ltd.
28 Trinity Road
Nailsea, Somerset BS48 4NU
United Kingdom
TEL: 01275858891
LIT046 CUDA
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit circuit breaker. If necessary, reset.
C. Check the lamp connection.
D. Replace the lamp (refer to 9.1)
Rev. E
Page 12 of 60