Water Line Installation; Before You Call For Service - GE IM-5D Manuel D'utilisation Et D'installation

Before you call for service...

Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Problem
Automatic icemaker does not
work
Possible Causes
Freezer compartment too
warm.
Icemaker is not turned on
Icemaker is not plugged in
correctly
Water line is kinked
Water supply tuned off or not
connected
Piled up cubes in the storage
bin cause the icemaker to shut
off
What To Do
After installing the kit, allow the refrigerator to
completely cool down for 24 hours . Once the
compartment is cool, the icemaker will begin ice
production .
Use the ICE MAKER button on the control .
Check that the icemaker cord pug is fully inserted into
the socket . See Plug in the Icemaker, page 10 .
Check that the plastic water line running from the valve
to the water tube inlet is not kinked . See Connect the
Water Line . A kink in the water line will restrict flow of
water .
After installing the kit, make sure the house water
supply to the refrigerator has been turned on .
Level cubes by hand .
GEAppliances.com
Adhesive-backed
Fasteners
Water Line
Tubing
13